Related Products

AH3000 Series Withdrawal Sleeve

An Adapter or a Withdrawal Sleeve mounted bearing requires the correct reduction of Radial Internal Clearance of the bearing so as to prevent relative motion amongst the bearing inner ring, the sleeve and the shaft. Non-compliance with proper mounting procedures will invariably lead to hot running of the bearing and subsequently to it's premature failure.

Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing

Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Dimensions(mm) Weight(kg) Locknut
d1 d B3 B4 D1 D2 a b f G

AH3024 115 120 60 64 124 123.5 16 13 4 M130 X 2 0.75 KM26
AH3026 125 130 67 71 134.5 134 17 14 4 M140 X 2 0.93 KM28
AH3028 135 140 68 73 144.67 144 17 14 4 M150 X 2 1.01 KM30
AH3030 145 150 72 77 154.92 154 18 15 4 M160 X 2 1.15 KM32
AH3032 150 160 77 82 165.25 164 19 16 5 M170 X 2 2.06 KM34
AH3034 160 170 85 90 175.83 174 20 17 5 M 185 X 3 2.43 KM36
AH3036 170 180 92 98 186.25 185 23 17 5 M190 X 3 2.8 KM38
AH3038 180 190 96 102 196.5 195 24 18 5 M205 X 4 3.32 HM41
>AH3040 190 200 102 108 206.92 205 25 19 5 M215 X 4 3.8 HM43
AH3044 200 220 111 117 227.58 226 26 20 5 M235 X 4 7.4 HM47
AH3048 220 240 116 123 248 247 27 21 5 M260 X 4 8.75 HM52
AH3052 240 260 128 135 268.83 267 29 23 6 M280 X 4 10.7 HM56
AH3056 260 280 131 139 289.08 288 30 24 6 M300 X 4 12 HM60
AH3060 280 300 145 153 310.08 309 32 26 6 M320 X 5 14.4 HM64
AH3064 300 320 149 157 330 329 33 27 6 T345 X 5 16 HM69
AH3068 320 340 162 171 351.42 350 34 28 6 T365 X 5 19.5 HM73
AH3072 340 360 167 176 371.67 370 36 30 6 T385 X 5 21 HM77
AH3076 360 380 170 180 391.92 390 37 31 6 T410 X 5 23.2 HM82
AH3080 380 400 183 193 412.83 411 33 33 6 T430 X 5 27.3 HM86
AH3084 400 420 186 196 433 432 40 34 8 T450 X 5 29 HM9

Page Prev Next