AH3200 Series Withdrawal Sleeve

An Adapter or a Withdrawal Sleeve mounted bearing requires the correct reduction of Radial Internal Clearance of the bearing so as to prevent relative motion amongst the bearing inner ring, the sleeve and the shaft. Non-compliance with proper mounting procedures will invariably lead to hot running of the bearing and subsequently to it's premature failure.

Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing.

Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Dimensions(mm) Weight(kg) Locknut
d1 d B3 B4 D1 D2 a b f G
AH3218 58 90 63 67 94.5 94 13 10 3 M100 X 2 0.58 KM20
AH3219 90 95 67 71 99.75 99 14 11 4 M105 X 2 0.65 KM21
AH3220 95 100 73 77 105.25 104.5 14 11 4 M110 X 2 0.77 KM22
AH3222 105 110 82 86 116 115.5 14 11 4 M125 X 2 0.88 KM25
AH3224 115 120 90 94 126.5 126 16 13 4 M 135 X 2 1.11 KM27
AH3226 125 130 98 102 137 136.5 18 15 4 M145 X 2 1.58 KM29
AH3228 135 140 104 109 147.58 147 18 15 4 M155 X 3 1.84 KM31
AH3230 145 150 114 119 158.25 157.5 20 17 4 M165 X 3 2.22 KM33
AH3232 150 160 124 130 168.92 167 23 2 5 M180 X 3 4.08 KM36
AH3234 160 170 134 140 179.42 178 27 24 5 M190 X 3 4.8 KM38
AH3236 170 180 140 146 189.92 188 27 24 5 M200 X 3 5.32 KM40
AH3238 180 190 145 152 200.08 199 31 25 5 M210 X 4 5.9 KM42
AH3240 190 200 153 160 210.75 209 31 25 5 M220 X 4 6.68 KM44
AH3260 280 300 228 236 316.33 315 40 34 6 M330 X 5 26 HM66
AH3264 300 320 246 254 337.67 336 42 36 6 M350 X 5 30.6 HM70
AH3268 320 340 264 273 359.08 358 44 38 6 M370 X 5 35.4 HM74
AH3272 340 360 274 283 379.95 378 46 40 6 M400 X 5 41.5 HM80
AH3276 360 380 284 294 400.5 399 48 42 6 M420 X 5 45.6 HM84
AH3280 380 400 302 312 421.83 420 50 44 6 M440 X 5 51.7 HM88
AH3284 400 420 321 331 443.25 442 52 46 8 M460 X 5 58.9 HM92

Page Prev Next