Related Products

AOH3100 Series Withdrawal Sleeve

An Adapter or a Withdrawal Sleeve mounted bearing requires the correct reduction of Radial Internal Clearance of the bearing so as to prevent relative motion amongst the bearing inner ring, the sleeve and the shaft. Non-compliance with proper mounting procedures will invariably lead to hot running of the bearing and subsequently to it's premature failure.

Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing.

Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)


  • Product Details
Page Prev Next

Adapter Sleeve Dimensions(mm) Weight(kg) Locknut
d1 L b Ro e t D1
AOH3132 150 103 16 M6 4.5 7 M180 X 3 3.21 KM36
AOH3134 160 104 16 M6 4.5 7 M 190 X 3 3.4 KM38
AOH3136 170 116 19 M6 4.5 7 M200 X 3 4.22 KM40
AOH3138 180 125 20 M6 4.5 7 T210 X 4 4.89 HM42
AOH3140 190 134 21 M6 4.5 7 T220 X 4 5.49 HM44
AOH3144 200 145 23 PT1/8 8 12 T240 X 4 10.4 HM48
AOH3148 220 154 25 PT1/8 8 12 T260 X 4 12 HM52
AOH3152 240 172 26 PT1/8 8 12 T290 X 4 16.2 HM58
AOH3156 260 175 28 PT1/8 8 12 T310 X 5 17.5 HM62
AOH3160 280 192 30 PT1/8 8 12 T330 X 5 20.8 HM66
AOH3164 300 209 31 PT1/8 8 12 T350 X 5 24.5 HM70
AOH3168 320 225 33 PT1/8 8 12 T370 X 5 29 HM74
AOH3172 340 229 35 PT1/8 8 12 T400 X 5 33 HM80
AOH3176 360 232 36 PT1/8 8 12 T420 X 5 35.7 HM84
AOH3180 380 240 38 PT1/8 8 12 T440 X 5 39.5 HM88
AOH3184 400 266 40 PT1/8 8 12 T460 X 5 46.5 HM92
AOH3188 420 270 42 PT1/8 8 12 T480 X 5 49.8 HM96
AOH3192 440 285 43 PT1/8 8 12 T510 X 6 57.9 HM102 
AOH3196 460 295 45 PT1/8 8 12 T530 X 6 63.1 HM106

Page Prev Next