AOH3200 Series Withdrawal Sleeve

An Adapter or a Withdrawal Sleeve mounted bearing requires the correct reduction of Radial Internal Clearance of the bearing so as to prevent relative motion amongst the bearing inner ring, the sleeve and the shaft. Non-compliance with proper mounting procedures will invariably lead to hot running of the bearing and subsequently to its' premature failure.

Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing.

Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)


  • Product Details
Page Prev Next

Adapter Sleeve Dimensions(mm) Weight(kg) Locknut
d1 L b Ro e t D1
AOH3232 150 124 20 M6 4.5 7 M180X3 4.08 KM36
AOH3234 160 134 24 M6 4.5 7 M190X3 4.8 KM38
AOH3236 170 140 24 M6 4.5 7 M200 X 3 5.32 HM40
AOH3238 180 145 25 M6 4.5 7 M210X4 5.9 HM42
AOH3240 190 153 25 M6 4.5 7 M220X4 6.68 HM44
AOH3260 280 228 34 PT1/8 8 12 M330 X 5 26 HM66
AOH3264 300 246 36 PT1/8 8 12 M350 X 5 30 HM70
AOH3268 320 264 38 PT1/8 8 12 M370 X 5 35.8 HM74
AOH3272 340 274 40 PT1/8 8 12 M400 X 5 41.6 HM80
AOH3276 360 284 42 PT1/8 8 12 M420 X 5 46.3 HM84
AOH3280 380 302 44 PT1/8 8 12 M440 X 5 52.5 HM88
AOH3284 400 321 46 PT1/8 8 12 M460 X 5 59.7 HM92
AOH3288 420 330 48 PT1/8 8 12 M480 X 5 64.8 HM96
AOH3292 440 340 50 PT1/8 8 12 M510X5 75.2 HM102
AOH3296 460 364 52 PT1/8 8 12 M530 X 5 83.1 HM106


Page Prev Next