Related Products

H300 Adapter Sleeve

Adapter sleeves serve to mount and remove bearings with tapered bores onto cylindrical shafts. Adapter sleeves are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock nuts to hold the bearing in position after being mounted on the sleeve. Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place.


Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Shaft d1 Dimensions (mm) Weight (kg) Composition
HS in HA in HE in H mm d d2 B1 B2 G Sleeve Locknut Lockwasher

H304 5/8

17 20 32 28 7 M20X1 0.04 A304 KM4 MB04
H305
11/16 3/4 20 25 38 29 8 M25X 1.5 0.07 A305 KM5 MB05
H306 7/8 15/16 1 25 30 45 31 8 M30X1.5 0.11 A306 KM6 MB06
H307 1-1/8 1-3/16
30 35 52 35 9 M35X 1.5 0.14 A307 KM7 MB07
H308 1-3/8 1-5/16 1-1/4 35 40 58 36 10 M40 X 1 .5 0.19 A308 KM8 MB08
H309
1-7/16 1-1/2 40 45 65 39 11 M45X 1.5 0.25 A309 KM9 MB09
H310 1-5/8 1-11/16 1-3/4 45 50 70 42 12 M50X1.5 0.3 A310 KM10 MB10
H311 1-7/8 1-15/16 2 50 55 75 45 12 M55X2 0.35 A311 KM11 MB11
H312 2-1/8 2-1/16
55 60 80 47 13 M60X2 0.39 A312 KM12 MB12
H313 2-3/8 2-3/16 2-1/4 60 65 85 50 14 M65X2 0.46 A313 KM13 MB13
H314


60 70 92 52 14 M70X2 0.72 A314 KM14 MB14
H315 2-5/8 2-7/16 2-1/2 65 75 98 55 15 M75X2 0.83 A315 KM15 MB15
H316 2-7/8 2-11/16 2-3/4 70 80 105 59 17 M80X2 1 A316 KM16 MB16
H317
2-15/16 3 75 85 110 63 18 M85X2 1.2 A317 KM17 MB17
H318 3-1/8 3-3/16 3-1/4 80 90 120 65 18 M90X2 1.35 A318 KM18 MB18
H319
3-5/16 3-1/4 85 95 125 68 19 M95X2 1.55 A319 KM19 MB19
H320
3-7/16 3-1/2 90 100 130 71 20 M100X2 1.7 A320 KM 20 MB20
H321


95 105 140 74 20 M105X2 1.95 A321 KM21 MB21
H322
3-15/16 4 100 110 145 77 21 M110X2 2.2 A322 KM22 MB22

Page Prev Next