Related Products

H3100 Adapter Sleeve

Adapter sleeves serve to mount and remove bearings with tapered bores onto cylindrical shafts. Adapter sleeves are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock nuts to hold the bearing in position after being mounted on the sleeve. Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place.


Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Shaft d1 Dimensions (mm) Weight(kg) Composition
H mm HE in HA in d d2 B1 B2 G Sleeve Locknut Lockwasher Lockcard

H3120 90 3-1 2 3-7/16 100 130 75 20 M100X2 1.8 A3 120 KM20 MB20
H3122 100 4 3-15/16 110 145 81 21 M110X2 2.4 A3122 KM22 MB22
H3124 110 4-1/4 4-3/16 120 155 88 22 M120X2 2.65 A3 124 KM24 MB24
H3126 115 4-1/2 4-7/16 130 165 92 23 M130X2 3.65 A3126 KM26 MB26
H3128 125 5 4-15/16 140 180 97 24 M140X2 4.36 A3128 KM28 MB28
H3130 135 5-1/4 5-3/16 150 195 111 26 M150X2 5.5 A3 130 KM30 MB30
H3132 140 5-1/2 5-7/16 160 210 119 28 M160X3 7.65 A3 132 KM32 MB32
H3134 150 6 5-15/16 170 220 122 29 M170X3 8.4 A3 134 KM34 MB34
H3136 160 6-1/2 6-7/16 180 230 131 30 M180X3 9.5 A3 136 KM36 MB36
H3138 170 6-3/4 6-15/16 190 240 141 31 M190X3 11 A3 138 KM 38 MB38
H3140 180 7 7-3/16 200 250 150 32 M200 X 3 12 A3 140 KM40 MB40
H3144 200
7-15/16 220 280 161 44 T220 X 4 15 A3 144 KM44
MS44
H3148 220

240 300 172 46 T240 X 4 18 A3 148 KM48
MS48
H3152 240

260 330 190 49 T260 X 4 22.5 A3 152 KM52
MS52
H3156 260

280 350 195 51 T280 X 4 25 A3 156 KM56
MS56
H3160 280

300 380 208 53 T300 X 4 30 A3 160 KM60
MS60
H3164 300

320 400 226 56 T320 X 5 35 A3 164 KM64
MS64
H3168 320

340 440 254 72 T340 X 5
A3 168 KM68
MS68
H3172 340

360 460 259 75 T360 X 5
A3172 KM72
MS72
H3176 360

380 490 264 77 T380 X 5
A3176 KM 76
MS76

Page Prev Next