H3200 Adapter Sleeve

Adapter sleeves serve to mount and remove bearings with tapered bores onto cylindrical shafts. Adapter sleeves are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock nuts to hold the bearing in position after being mounted on the sleeve. Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place.


Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Dimensions (mm) Weight(kg) Composition
d1 d d2 B1 B2 G Sleeve Locknut Lockcard
H3260 280 300 380 240 53 T300X4 34.1 A3260 HM60 MS60
H3264 300 320 400 258 36 T320X5 39.3 A3264 HM64 MS64
H3268 320 340 440 288 72 T340X5 54.6 A3268 HM68 MS68
H3272 340 360 460 299 75 T360X5 60.2 A3272 HM72 MS72
H3276 360 380 490 310 77 T380X5 69.6 A3276 HM76 MS76
H3280 380 400 520 328 82 T400X5 81 A3280 HM80 MS80
H3284 400 420 540 352 90 T420X5 94 A3284 HM84 MS84
H3288 410 440 560 361 90 T440X5 118 A3288 HM88 MS88
H3292 430 460 580 382 95 T460X5 132 A3292 HM92 MS92
H3296 450 480 620 397 95 T480X5 152 A3296 HM96 MS96



Page Prev Next