OH2300 Adapter Sleeve

Adapter sleeves serve to mount and remove bearings with tapered bores onto cylindrical shafts. Adapter sleeves are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock nuts to hold the bearing in position after being mounted on the sleeve. Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place.


Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Shaft d1 H mm Dimensions (mm) Weight(kg) Composition
d d2 B1 B2 G1 A G Sleeve Locknut Lockcard
OH2344 200 220 280 186 44 M6 4.2 T220 X 4 16.7 A2344 KM44 MS44
OH2348 220 240 300 199 46 M6 4.2 T240 X 4 29.7 A2348 KM48 MS48
OH2352 240 260 330 211 49 M6 4.2 T260 X 4 24.2 A2352 KM52 MS52
OH2356 260 280 350 224 51 M6 4.2 T280 X 4 27.8 A2356 KM56 MS56

Page Prev Next