Related Products

OH3100 Adapter Sleeve

Adapter sleeves serve to mount and remove bearings with tapered bores onto cylindrical shafts. Adapter sleeves are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock nuts to hold the bearing in position after being mounted on the sleeve. Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place.


Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Shaft d1 H mm Dimensions (mm) Weight(kg) Composition
d d2 B1 B2 G1 A G Sleeve Locknut Lockcard

OH3144 200 200 280 161 44 M6 4.2 T220 X 4 15 A3144 KM44 MS44
OH3148 220 240 300 172 46 M6 4.2 T240 X 4 18 A3148 KM48 MS48
OH3152 240 260 330 190 49 M6 4.2 T260 X 4 22.5 A3152 KM52 MS52
OH3156 260 280 350 195 51 M6 4.2 T280 X 4 25 A3156 KM56 MS56
OH3160 280 300 380 208 53 M6 4.2 T300 X 4 30 A3160 KM60 MS60
OH3164 300 320 400 226 56 M6 4 T320 X 5 35 A3 164 KM64 MS64
OH3168 320 340 440 254 72 M6 4 T340 X 5
A3168 KM68 MS68
OH3172 340 360 460 259 75 M6 4 T360 X 5
A3172 KM72 MS72
OH3176 360 380 490 264 77 M6 4 T380 X 5
A3176 KM76 MS76
OH3180 380 400 520 272 82 M6 4 T400 X 5
A3180 KM80 MS80
OH3184 400 420 540 304 90 M6 4 T420 X 5
A3184 KM84 MS84
OH3188 410 440 560 307 90 MS 6.5 T440 X 5
A3188 KM88 MS88
OH3192 430 460 580 326 95 MS 6.5 T460 X 5
A3 192 KM92 MS92
OH3196 450 480 620 335 95 M8 6.5 T408 X 5
A3 196 KM96 MS96

Page Prev Next