Related Products

SB200 Series Insert bearing for mounted bearings unit

Insert bearing for mounted bearings unit

Pre-lubricated (Greased), Light Duty, Narrow Inner Ring, Setscrew Locking

-SB 200 type bearing is self-aligning for standard load capacity

-Standard lubrication feature has a drilled hole in groove on locking collar side and drilled oil hole opposite the collar to make it interchangeable with all manufacturers

-Use SB Insert Bearings as replacement bearing for many Pillow Blocks, 2-Bolt Flanges, 3-Bolt Flanges, 4-Bolt Flanges, Take up units , etc.... Saving money for replacing the insert bearing instead of replacing the whole unit.


Price: US $0.9-25 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details

Insert bearings and wide inner ring bearings are used for mounting on shafts without the need for shoulders or adapters. The bearing is locked in place through setscrews or a locking collar. UC Style Insert Bearings have an inner ring that extends on both sides of the bearing and SB Style Insert Bearings extend on one side. 

Both designs however are intended to provide extra shaft support. Sometimes insert bearings are simply standard radial bearings that fit into a housing and these bearings may be purchased as stand-alone products to use as replacements. While standard radial ball bearings must be pressed into a machined shaft, using special installation tools, insert bearings can be slip fit directly onto the shaft.

Page Prev Next

Bearing No. Dimensions mm in. Dynamic load ratings N Static load ratings N Weight(kg)
d D B C S S1 ds G
SB201 12 40 22 12 6 16 M5×0.8 4.5 9600 4600 0.1
SB201-8 1/2 1.57 0.87 0.47 0.24 0.63 10#-32 0.18 9600 4600 0.1
SB202 15 40 22 12 6 16 M5 x 0.8 4.5 9600 4600 0.1
SB202-9 9/16 1.57 0.87 0.47 0.24 0.63 10#-32 0.18 9600 4600 0.1
SB202-10 5/8 1.57 0.87 0.47 0.24 0.63 10#-32 0.18 9600 4600 0.1
SB203 17 40 22 12 6 16 M5 X 0.8 4.5 9600 4600 0.09
SB203-11 11/16 1.57 0,8661 0.47 0.24 0.63 10#-32 0.18 9600 4600 0.09
SB204 20 47 25 14 7 18 M6x1 4.5 12800 6650 0.13
SB204-12 3/4 1.85 0.98 0.55 276 0.71 1/4-28UNF 0.18 12800 6650 0 14
SB205 25 52 27 15 7.5 19.5 M6x1 5.5 14000 7850 0.16
SB205-13 13/16 2.05 1 .0630 0.59 0.29 0.77 1/4-28UNF 0.217 14000 7850 0.19
SB205-14 7/8 2.05 1 .0630 0.59 0.29 0.77 1/4-28UNF 0.22 14000 7850 0.18
SB205-15 15/16 2.05 1 .0630 0.59 0.29 0.77 1/4-28UNF 0.22 14000 7850 0.17
SB205-16 1 2.05 1 .0630 0.59 0.29 0.77 1/4-28UNF 0.22 14000 7850 0.16
SB206 30 62 30 16 8 22 M6x1 6 19500 11300 0.25
SB206-17 1-1/16 2.44 1.18 0.63 0.32 0.87 1/4-28UNF 0.24 19500 11300 0 28
SB206-18 1-1/8 2.44 1.18 0.63 0.32 0.87 1/4-28UNF 0.24 19500 11300 0.26
SB206-19 1-3/16 2.44 1.18 0.63 0.32 0.87 1/4-28UNF 0.24 19500 11300 0.25
SB206-20 1-1/4 2.44 1.18 0.63 0.32 0.87 1/4-28UNF 0.24 19500 11300 0.24
SB207 35 72 32 17 8.5 23.5 M8×1 6.5 25700 15300 0.38

Page Prev Next