Related Products

H200 Adapter Sleeve

Adapter sleeves serve to mount and remove bearings with tapered bores onto cylindrical shafts. Adapter sleeves are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock nuts to hold the bearing in position after being mounted on the sleeve. Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place.


Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Shaft d1 Dimensions (mm) Weight (kg) Composition
HS in HA in HE in H mm d d2 B1 B2 G Sleeve Locknut Lockwasher
H204 5/8 17 20 32 24 7 M20 X 1 0.04 A204 KM4 MB04
H205 11/16 3/4 20 25 38 26 8 M25X 1.5 0.07 A205 KM5 MB05
H206 7/8 15/16 1 25 30 45 27 8 M30X 1.5 0.1 A206 KM6 MB06
H207 1-1/8 1-3/16 30 35 52 29 9 M35X 1.5 0.13 A207 KM7 MB07
H208 1-3/8 1-5/16 1-1/4 35 40 58 31 10 M40X 1.5 0.17 A208 KM8 MB08
H209 1-7/16 1-1/2 40 45 65 33 11 M45X1.5 0.23 A209 KM9 MB09
H210 1-5/8 1-11/16 1-3/4 45 50 70 35 12 M50 X 1 .5 0.27 A210 KM10 MB10
H211 1-7/8 1-15/16 2 50 55 75 37 13 M55X2 0.31 A211 KM11 MB11
H212 2-1/8 2-1/16 55 60 80 38 13 M60X2 0.35 A212 KM12 MB12
H213 2-3/8 2-3/16 2-1/4 60 65 85 40 14 M65X2 0.4 A213 KM13 MB13
H214 60 70 92 41 14 M70X2 0.6 A214 KM14 MB14
H215 2-5/8 2-7/16 2-1/2 65 75 98 42 15 M75X2 0.71 A215 KM15 MB15
H216 2-7/8 2-11/16 2-3/4 70 80 105 46 17 M80X2 0.88 A216 KM16 MB16
H217 2-15/16 3 75 85 110 50 18 M85X2 1.02 A217 KM17 MB17
H218 3-1/8 3-3/16 3-1/4 80 90 120 52 18 M90X2 1.2 A218 KM18 MB18
H219 2-5/16 3-1/4 85 95 125 55 19 M95X2 1.35 A219 KM19 MB19
H220 3-7/16 3-1/2 90 100 130 58 20 M100X2 1.5 A220 KM20 MB20
H221 95 105 140 60 20 M105X2 1.7 A221 KM21 MB21
H222 3-15/16 4 100 110 145 63 21 M110X2 1.9 A222 KM22 MB22

Page Prev Next