Related Products

AOH2300 Series Withdrawal Sleeve

An Adapter or a Withdrawal Sleeve mounted bearing requires the correct reduction of Radial Internal Clearance of the bearing so as to prevent relative motion amongst the bearing inner ring, the sleeve and the shaft. Non-compliance with proper mounting procedures will invariably lead to hot running of the bearing and subsequently to it's premature failure.

Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing.

Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next

Adapter Sleeve Dimensions(mm) Weight(kg) Locknut
d1 L b Ro e t D1
AOH2332 150 140 24 M6 4.5 7 M180 X 3 4.72 KM36
AOH2334 160 146 24 M6 4.5 7 M190 X 3 5.25 KM38
AOH2336 170 154 26 M6 4.5 7 M200 X 3 5.83 KM40
AOH2338 180 160 26 M6 4.5 7 T210 X 4 6.63 HM42
AOH2340 190 170 30 M6 4.5 7 T220 X 4 7.54 HM44
AOH2344 200 181 30 PT1/8 8 12 T240 X 4 13.5 HM48
AOH2348 220 189 30 PT1/8 8 12 T260 X 4 15.5 HM52
AOH2352 240 205 30 PT1/8 8 12 T290 X 4 19.6 HM58
AOH2356 260 212 30 PT1/8 8 12 T310 X 5 21.6 HM6

Page Prev Next