Related Products

HC200 Series Flange mounted ball bearings

Flange mounted ball bearings inserts

Normal Duty, Wide Inner Ring, Eccentric Collar Locking, Metal slingers with contact seals

-HC 200 type bearing is self-aligning for standard load capacity

-Standard lubrication feature has a drilled hole in groove on locking collar side and drilled oil hole opposite the collar to make it interchangeable with all manufacturers

-The Eccentric Collar Locking enables the bearing insert to be locked on the shaft by a form with eccentric diameter at the extended end of inner ring matching a separate collar of which the eccentric diameter bore and form coincide.This combination enforces the fixation by gripping engaged with each other.  Bearings with eccentric locking collar should be used for application where the direction of rotation is constant.

-Use HC Insert Bearings as replacement bearing for many Pillow Blocks, 2-Bolt Flanges , 3-Bolt Flanges, 4-Bolt Flanges , Take up units , etc...  Saving money for replacing the insert bearing instead of replacing the whole unit.


Price: US $0.9-25 / Piece | 200 Piece/Pieces (Min. Order)


  • Product Details

Insert bearings and wide inner ring bearings are used for mounting on shafts without the need for shoulders or adapters. The bearing is locked in place through setscrews or a locking collar. UC Style Insert Bearings have an inner ring that extends on both sides of the bearing and SB Style Insert Bearings extend on one side. 

Both designs however are intended to provide extra shaft support. Sometimes insert bearings are simply standard radial bearings that fit into a housing and these bearings may be purchased as stand-alone products to use as replacements. While standard radial ball bearings must be pressed into a machined shaft, using special installation tools, insert bearings can be slip fit directly onto the shaft.

Page Prev Next

Bearing No. Dimensions mm in. Dynamic load ratings N Static load ratings N Weight(kg)
d D B1 B C S ds G B5 d3 F

HC201 12 47 43.7 34.2 17 17.1 M6x1 4.8 13.5 33.3 3.7 12800 6650 0.29
HC201-8 1/2 1.8504 1.72 1.3465 0.6693 0.673 1/4-28UNF 0.189 0.531 1.311 0.146 12800 6650 0.29
HC202 15 47 43.7 34.2 17 17.1 M6x1 4.8 13.5 33.3 3.7 12800 6650 0.27
HC202-9 9/16 1.8504 1.72 1.3465 0.6693 0.673 1/4-28UNF 0.189 0.531 1.311 0.146 12800 6650 0.26
HC202-10 5/8 1.8504 1.72 1.3465 0.6693 0.673 1/4-28UNF 0.189 0.531 1.311 0.146 12800 6650 0.26
HC203 17 47 43.7 34.2 17 17.1 M6x1 4.8 13.5 33.3 3.7 12800 6650 0.25
HC203-11 11/16 1.8504 1.72 1.3465 0.6693 0.673 1/4-28UNF 0.189 0.531 1.311 0.146 12800 6650 0.25
HC204 20 47 43.7 34.2 17 17.1 M6x1 4.8 13.5 33.3 3.7 12800 6650 0.23
HC204-12 3/4 1.8504 1.72 1.3465 0.6693 0.673 1/4-28UNF 0.189 0.531 1.311 0.146 12800 6650 0.23
HC205 25 52 44.4 34.9 17 17.5 M6 x1 4.8 13.5 38.1 3.9 14000 7850 0.27
HC205-13 13/16 2.0472 1.748 1.374 0.6693 0.689 1/4 -28UNF 0.189 0.531 1.5 0.154 14000 7850 0.32
HC205-14 7/8 2.0472 1.748 1.374 0.6693 0.689 1/4 -28UNF 0.189 0.531 1.5 0.154 14000 7850 0.31
HC205-15 15/16 2.0472 1.748 1.374 0.6693 0.689 1/4 -28UNF 0.189 0.531 1.5 0.154 14000 7850 0.29
HC205-16 1 2.0472 1.748 1.374 0.6693 0.689 1/4 -28UNF 0.189 0.531 1.5 0.154 14000 7850 0.27
HC206 30 62 48.4 36.5 19 18.3 M8 x1 6 15.9 44.5 5 19510 11300 0.45
HC206-17 1-1/16 2.4409 1.906 1.437 0.748 0.72 5/16-24UNF 0.236 0.626 1.752 0.197 19510 11300 0.5
HC206-18 1-1/8 2.4409 1.906 1.437 0.748 0.72 5/16-24UNF 0.236 0.626 1.752 0.197 19510 11300 0.47
HC206-19 1-3/16 2.4409 1.906 1.437 0.748 0.72 5/16-24UNF 0.236 0.626 1.752 0.197 19510 11300 0.45
HC206-20 1-1/4 2.4409 1.906 1.437 0.748 0.72 5/16-24UNF 0.236 0.626 1.752 0.197 19510 11300 0.42
HC207 35 72 51.1 37.6 20 18.8 M8 x1 6.8 17.5 55.6 5.7 25700 15300 0.6

Page Prev Next