Related Products

OH3000 Adapter Sleeve

Adapter sleeves serve to mount and remove bearings with tapered bores onto cylindrical shafts. Adapter sleeves are used to compensate for a size deviation between the bearing bore and shaft diameter or to convert sizes from metric to inch. Both adapter and removal sleeves utilize lock nuts to hold the bearing in position after being mounted on the sleeve. Threads located on the small end of the tapered sleeve are used in conjunction with a nut to push the bearing up the tapered surface. This allows the bearing and sleeve to seat firmly in place.


Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)

  • Product Details
Page Prev Next
Adapter Sleeve Shaft d1 H mm Dimensions (mm) Weight(kg) Composition
d d2 B1 B2 G1 A G Sleeve Locknut Lockcard

OH3044 200 220 260 126 41 M6 4.2 T220 X 4 10.5 A3044 KML44 MSL44
OH3048 220 240 290 133 46 M6 4.2 T240 X 4 13 A3048 KML48 MSL48
OH3052 240 260 310 145 46 M6 4.2 T260 X 4 15.5 A3052 KML52 MSL52
OH3056 260 280 330 152 50 M6 4.2 T280 X 4 17.5 A3056 KML56 MSL56
OH3060 280 300 360 168 54 M6 4.2 T300 X 4 23 A3060 KML60 MSL60
OH3064 300 320 380 171 55 M6 4 T320 X 5 24.5 A3064 KML64 MSL64
OH3068 320 340 400 187 58 M6 4 T340 X 5 28.5 A3168 KML68 MSL68
OH3072 340 360 420 188 58 M6 4 T360 X 5 30.5 A3072 KML72 MSL72
OH3076 360 380 450 193 62 M6 4 T380 X 5 36 A3076 KML76 MSL76
OH3080 380 400 470 210 66 M6 4 T400 X 5 41.5 A3080 KML80 MSL80
OH3084 400 420 490 212 66 M6 4 T420 X 5 43.5 A3084 KML84 MSL84
OH3088 410 440 520 228 77 M8 6.5 T440 X 5 65.2 A3088 KML88 MSL88
OH3092 430 460 540 234 77 M8 6.5 T460 X 5 69.5 A3092 KML92 MSL92
OH3096 450 480 560 237 77 M8 6.5 T408 X 5 73.5 A3096 KML96 MSL96
Page Prev Next