Related Products

AOH3000 Series Withdrawal Sleeve

An Adapter or a Withdrawal Sleeve mounted bearing requires the correct reduction of Radial Internal Clearance of the bearing so as to prevent relative motion amongst the bearing inner ring, the sleeve and the shaft. Non-compliance with proper mounting procedures will invariably lead to hot running of the bearing and subsequently to it's premature failure.

Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing

Price: US $0.3-3 / Piece | 200 Piece/Pieces (Min. Order)


  • Product Details
Page Prev Next

Adapter Sleeve Dimensions(mm) Weight(kg) Locknut
d1 L b Ro e t D1

AOH3032 150 77 16 M6 4 7 M170X3 2.06 KM34
AOH3034 160 85 17 M6 4 7 M180X3 2.43 KM36
AOH3036 170 92 17 M6 4 7 M190X3 2.81 KM38
AOH3038 180 96 18 M6 4 7 M205 X 4 3.32 HM41
AOH3040 190 102 19 M6 4 7 M215X4 3.8 HM43
AOH3044 200 111 20 PT1/8 8 12 M235X4 7.4 HM47
AOH3048 220 116 21 PT1/8 8 12 M260 X 4 8.75 HM52
AOH3052 240 128 23 PT1/8 8 12 M280 X 4 10.7 HM56
AOH3056 260 131 24 PT1/8 8 12 M300 X 4 12 HM60
AOH3060 280 145 26 PT1/8 8 12 M320 X 5 14.4 HM64
AOH3064 300 149 27 PT1/8 8 12 M340 X 5 16 HM69
AOH3068 320 162 28 PT1/8 8 12 M365 X 5 19.5 HM73
AOH3072 340 167 30 PT1/8 8 12 M385 X 5 21 HM77
AOH3076 360 170 31 PT1/8 8 12 M410X5 23.2 HM82
AOH3080 380 183 33 PT1/8 8 12 M430 X 5 27.3 HM86
AOH3084 400 186 34 PT1/8 8 12 M450 X 5 29 HM90
AOH3088 420 194 35 PT1/8 8 12 M470 X 5 32 HM94
AOH3092 440 202 37 PT1/8 8 12 M490 X 5 35.2 HM98
AOH3096 460 205 38 PT1/8 8 12 M520 X 6 39.2 HM104

Page Prev Next